儀器功能 / Instrument Functions

操作介面與便利性 / User Interface & Usability

  • 觸控面板操作簡單直覺,提供 PIN 保護使用者帳戶及染料校準功能。
    Intuitive touchscreen panel with PIN-protected user accounts and dye calibration.

  • 支援96孔反應盤及八連排樣品管,減少操作工作量。
    Supports 96-well plates and 8-strip tubes, reducing workload.

  • Veriflex™ 溫控系統提供3或6個獨立溫控區,可同時進行多個實驗並快速循環,實驗可在30分鐘內完成。
    Veriflex™ block provides 3 or 6 independent temperature zones for multiplex runs with fast cycling; experiments can finish within 30 minutes.

光學與溫控系統 / Optics & Thermal Control

  • OptiFlex™ 光學系統結合6個激發與發射濾光片組,可進行多重螢光訊號偵測。
    OptiFlex™ optical system with 6 excitation/emission filter sets allows multiplex fluorescence detection.

  • 高靈敏度,可在單重反應中偵測目標量至1.5倍差異,動態範圍可達10 log。
    High sensitivity detecting target differences as small as 1.5-fold in singleplex reactions; dynamic range up to 10 log.

  • 溫控精度 ±0.25℃,最大升溫速率9℃/sec,均勻度0.4℃。
    Temperature control ±0.25℃, max ramp rate 9℃/sec, uniformity 0.4℃.

  • 反應體積範圍10–30μL(0.1 mL 96孔模組)。
    Reaction volume range: 10–30 μL (0.1 mL 96-well module).

軟體與分析功能 / Software & Analysis

  • 支援多種試劑,包括TaqMan® 探針及SYBR® Green D系列,即時螢光定量PCR可在30分鐘內完成。
    Supports multiple reagents including TaqMan® probes and SYBR® Green D; real-time qPCR can be completed in 30 minutes.

  • 軟體內建絕對定量、相對定量、SNP分型及熔解曲線分析功能,可自動分類及回溯數據。
    Built-in software supports absolute quantification, relative quantification (△△CT), SNP genotyping, and melting curve analysis with automated data classification and traceability.

  • 適合法醫DNA定量、人類鑑定及多重qPCR分析。
    Suitable for forensic DNA quantification, human identification, and multiplex qPCR.

儀器放置地點 / Location

  • 國際學術研究大樓八樓 IR801 Real-Time PCR室
    8th Floor, International Academic Research Building, Room IR801 – Real-Time PCR Laboratory

申請流程 & 注意事項 / Application & Notes

  1. 本儀器須完成管理人員認證並申請帳號後,方可預約操作。
    Users must complete technician certification and obtain a user account before booking.
  2. 每日四個時段可預約:8:30–11:00、11:00–13:30、13:30–16:00、16:00–18:30。
    Booking slots: 8:30–11:00, 11:00–13:30, 13:30–16:00, 16:00–18:30.

     

  3. 超過預約時間15分鐘未上機,視為放棄,經同意可讓其他使用者使用。
    No-shows over 15 min are forfeited; others may use with approval.
  4. 使用後保持儀器清潔,並通知管理人員確認。
    Keep the instrument clean and notify the technician after use.
  5. 發生故障立即通知管理人員,勿自行拆裝或調整。
    Report malfunctions immediately; do not disassemble or adjust.
  6. 操作不當造成損壞,維修費由使用者實驗室負擔。
    Damage from misuse is charged to the user’s lab.
  7. 非上班時間使用需申請門禁,使用後確認關機與關閉門禁。
    Off-hours use requires access approval; ensure shutdown and door security.

注意事項 / Notes

📄 下載申請表 / Download Form

使用收費標準 / Fees

校內使用者 / Internal Users: 300元/2.5小時/次

校外使用者 / External Users: 500元/2.5小時/次

育成中心進駐廠商 / Incubation Center Tenant:

💳 詳細收費表 / Fee Table

Go to top