Optima XPN 製備型超高速離心機
高轉速、智慧監控與安全追蹤離心平台

Optima™ XPN Preparative Ultracentrifuge 製備型超高速離心機

整合高轉速配置、15 吋觸控螢幕、中英文介面、eXpert 離心專家軟體、 遠端監控與完整運行追蹤功能;搭配精準驅動及散熱設計, 兼顧操作安全、資料管理、節能與低噪音運轉。

100k/90k/80k RPM 15 吋觸控螢幕 eXpert 模擬軟體 遠端監控 GMP/GLP 追蹤
01 儀器重點規格 / Key Specifications 轉速配置、觸控介面、待機功耗與運轉噪音
100k/90k/80k RPM 配置選項
15 吋 觸控操作螢幕
<60 W 待機功耗
<51 dB(A) 運轉噪音
  • Optima XPN 為製備型超高速離心機,配備 15 吋觸控螢幕、 中文/英文操作介面、eXpert 離心專家軟體及遠端監控功能。 The Optima™ XPN is a premier preparative ultracentrifuge with a 15-inch touchscreen, selectable Chinese/English interface, eXpert centrifuge software, and remote monitoring.
  • 提供 100k、90k 與 80k RPM 配置選項。 Available in 100k, 90k, and 80k RPM configurations.
  • 支援 180–264V AC 寬廣電壓範圍,可自動檢測及調整電壓。 Supports a wide 180–264V AC range with automatic voltage detection and adjustment.
  • 精準設計的驅動系統與散熱片有助於降低共振與噪音。 The precisely designed drive and cooling system reduces vibration and operating noise.
02 核心技術與運作方式 / Core Technology 觸控設定、eXpert 模擬、即時曲線與遠端監控
通識化理解: 使用者可透過觸控螢幕設定離心條件,利用 eXpert 軟體協助模擬與優化程序; 運轉過程可追蹤轉速、時間及溫度,並透過手機或電腦進行遠端監控與資料下載。
1 設定離心條件 以 15 吋觸控螢幕及中英文介面進行操作。
2 模擬與優化程序 使用 eXpert 軟體進行計算並優化離心程序。
3 監控與保存紀錄 即時追蹤運轉曲線,並以遠端方式監控及下載資料。
GUI 觸控螢幕操作

提供直觀操作方式,並可選擇中文或英文介面。 Intuitive operation with a selectable Chinese or English interface.

eX eXpert 離心專家軟體

可優化運行程序、執行相關計算並提升工作效率。 Optimizes runs, performs calculations, and improves workflow efficiency.

WEB 遠端監控

可透過手機或電腦設定參數、監控運轉並下載資料。 Monitor and control the system via mobile device or computer and download operational data.

CURVE 即時運轉曲線

可追蹤轉速、時間及溫度,支援 GMP/GLP 紀錄需求。 Tracks speed, time, and temperature to support GMP/GLP requirements.

03 研究應用 / Research Applications SW41 Ti、SW28 Ti、Type 70.1 Ti 與相容器材
SW41 SW41 Ti

可使用之相容轉子之一,原始頁面提供轉子說明文件。 One of the compatible rotors; a rotor information document is provided.

SW28 SW28 Ti

可使用之相容轉子之一,原始頁面提供轉子說明文件。 One of the compatible rotors; a rotor information document is provided.

70.1 Type 70.1 Ti

可使用之相容轉子之一,原始頁面提供轉子說明文件。 One of the compatible rotors; a rotor information document is provided.

04 分析與數據 / Analysis & Data 生物安全、資料追蹤、節能與低噪音設計
BIO 多層生物安全設計

提供安全且有效率的工作環境。 Multi-layered BioSafety features provide a safe and productive work environment.

NET 網路與自訂安全性

支援網路連線、自訂安全性及運行追蹤功能。 Supports networking, customizable security, and run-tracking functions.

TRACE 完整資料追蹤

包含轉子管理、序號追蹤、密碼保護與電子簽名。 Includes rotor management, serial-number tracking, password protection, and electronic signatures.

GMP 合規紀錄

即時曲線可監控轉速、時間與溫度,以支援 GMP/GLP 標準。 Real-time curves track speed, time, and temperature to support GMP/GLP standards.

ECO 高效節能

再生煞車系統可回收能量;待機功耗低於 60W, 相較同類產品可節省 33% 能源。 Regenerative braking recycles energy; standby power is below 60W, saving 33% energy compared with similar products.

QUIET 安靜運轉

精準驅動與散熱設計有助於降低共振,噪音低於 51 dB(A)。 The optimized drive and cooling system reduces vibration, with operating noise below 51 dB(A).

使用範圍: 實際操作限使用本單位提供之轉子,並須依相容離心管、平衡、溫度與安全規範執行。 Operation is limited to unit-provided rotors and must follow tube compatibility, balancing, temperature, and safety requirements.
05 申請資格與預約流程 / Application & Reservation 操作訓練、網路預約、逾時與門禁規定
完成操作訓練

使用者須完成操作訓練,並經管理員確認後, 方可自行操作儀器。 Complete training and obtain technician approval before self-operation.

完成網路預約

每次預約最少 1 小時;若全天使用, 隔日不可再預約。 Reserve online for a minimum of one hour per session; full-day use blocks next-day booking.

準時使用預約時段

未按時使用仍需付費;超過 15 分鐘視為放棄, 時段可能轉給其他使用者。 No-shows are still charged; more than 15 minutes late is treated as a forfeited slot that may be reassigned.

使用範圍: 僅限使用本單位提供之轉子,且只接受非感染性檢體。 Only unit-provided rotors may be used, and samples must be non-infectious.

06 操作規範與注意事項 / Operation Rules SOP、轉子、平衡、真空、清潔與故障處理
依 SOP 操作 / Follow SOP

請依標準作業流程操作,禁止戴手套操作觸控螢幕。 Follow the SOP and do not operate the touchscreen while wearing gloves.

轉子溫度 / Rotor Temperature

轉子存放於 4°C;若需其他溫度,須提前 3 小時準備, 且準備時間納入預約。 Rotors are stored at 4°C. Other temperatures require three hours of preparation, which is included in the booked time.

離心管與平衡 / Tubes & Balance

須使用相容離心管,平衡誤差不得超過 0.01 g。 Use compatible centrifuge tubes and balance within 0.01 g.

檢查與清潔 / Inspection & Cleaning

使用前後須確認轉子與儀器無損並完成清潔; overnight 使用者須於隔日確認。 Check the rotor and instrument before and after use, clean them thoroughly, and confirm the system the next day after overnight use.

離開前條件 / Before Leaving

真空壓力低於 20 μm 且儀器已達設定轉速後,方可離開。 Do not leave until the vacuum is below 20 μm and the instrument has reached the set speed.

故障處理 / Malfunction

儀器故障時請立即通知管理員, 勿自行拆裝或調整。 Report malfunctions immediately and do not disassemble or adjust the instrument.

損壞責任 / Damage Liability

因操作不當造成損壞,維修費用由使用者所屬實驗室負擔。 The user's laboratory is responsible for repair costs caused by improper operation.

07 使用收費、地點與文件 / Fees, Location & Documents 校內外收費、IR812 地點、轉子與繳費文件
使用者類別User Category收費標準
校內使用者 Internal Users 每小時 / Per hour
NT$ 200
校外使用者 External Users 每小時/次 / Per hour/session
NT$ 600
育成中心進駐廠商 Incubation Center Tenant 原始資料未提供收費 / Fee not provided in the source
儀器放置地點

國際學術研究大樓八樓 IR812 室-公共實驗室

Location

8th Floor, International Academic Research Building, Room IR812 – Shared / Public Laboratory

Go to top