Hitachi HT7700 穿透式電子顯微鏡
生物與材料超微結構高對比/高解析影像平台

Hitachi HT7700 Transmission Electron Microscope (HC-TEM)Hitachi HT7700 穿透式電子顯微鏡

像讓電子穿透超薄樣品,直接觀察細胞、病毒或材料內部的超微結構:HT7700 以 120 kV 加速電壓、HC 高對比與 HR 高解析模式,搭配數位 CCD 即時取像,提供 200 倍至 600,000 倍影像分析。

120 kV200X–600,000XHC/HR ModesDigital CCD生物與材料科學
01 儀器重點規格 / Key Specifications120 kV、放大倍率、HC/HR 模式與數位 CCD
120 kV加速電壓
200X–600,000X整體放大倍率
HC/HR高對比與高解析模式
Digital CCD即時數位影像擷取
  • 雙模式穿透式電子顯微鏡:HC 模式強化生物樣品對比,HR 模式呈現材料細部結構。High Contrast mode enhances biological-sample contrast, while High Resolution mode reveals fine material structures.
  • 數位取像:以 CCD 即時觀察與拍攝,不需傳統底片沖洗。A digital CCD provides real-time observation and image acquisition without film development.
  • 服務目的:提供細胞結構、材料微觀與生物醫學之電子顯微及分子層級影像分析。Provides electron-microscopy and molecular-level imaging services for cellular, material, and biomedical research.
02 核心技術與運作方式 / Core Technology樣品前處理、HC/HR 模式、電子穿透與數位取像
通識化理解:樣品須先依研究目的完成適合的固定、包埋與超薄切片等處理,再選擇 HC 或 HR 模式及放大倍率;電子穿透樣品後,由 CCD 即時記錄內部超微結構。
1確認樣品與前處理首次使用或委託檢體製備者,須先與負責人討論安全、樣品與處理需求。First-time users or sample-preparation clients must consult staff regarding safety and specimen requirements.
2選擇 HC/HR 模式依生物樣品對比或材料細節需求設定觀察模式與倍率。Choose HC or HR mode and magnification according to contrast or structural-detail needs.
3取得數位影像以 CCD 即時觀察、拍攝並保存穿透式電子顯微影像。Use the CCD for real-time observation and digital TEM image acquisition.
HCHigh Contrast Mode

HC 模式放大倍率 200X–200,000X,著重生物樣品對比。HC mode ranges from 200X to 200,000X and emphasizes biological contrast.

HRHigh Resolution Mode

HR 模式放大倍率 4,000X–600,000X,著重細部結構。HR mode ranges from 4,000X to 600,000X and emphasizes fine structural detail.

CCD數位 CCD 取像

即時觀察與拍攝,不需底片沖洗。Provides real-time imaging without film development.

PREP樣品處理服務

可搭配組織處理、超薄切片及離子覆膜等服務。Can be combined with tissue processing, ultrathin sectioning, and ion coating services.

03 研究應用 / Research Applications細胞組織、病毒細菌、囊泡運輸與材料微結構
CELL細胞與組織超微結構

觀察細胞及組織內部超微結構與形態。Ultrastructural and morphological analysis of cells and tissues.

VIR病毒、細菌與奈米顆粒

進行病毒、細菌及奈米顆粒影像鑑定。Imaging and identification of viruses, bacteria, and nanoparticles.

VES聚集與囊泡研究

分析蛋白聚集、囊泡形成及細胞內運輸。Investigates protein aggregation, vesicle formation, and intracellular transport.

MAT高分子與複合材料

研究高分子及複合材料之微結構。Microstructural analysis of polymers and composite materials.

04 分析與數據 / Analysis & Data倍率、對比、解析度、數位影像與處理時程
MAG倍率範圍

HC 200X–200,000X;HR 4,000X–600,000X。HC: 200X–200,000X; HR: 4,000X–600,000X.

CON高對比影像

HC 模式可強化生物樣品之對比。HC mode enhances biological-sample contrast.

RES高解析影像

HR 模式用於材料與微細結構觀察。HR mode supports material and fine-structure observation.

DIG數位影像流程

CCD 即時影像提升處理效率與品質穩定性。Digital CCD imaging improves workflow efficiency and image consistency.

TIME處理時程

完整組織處理約需一個月;超過 12 件時依比例延長。Full tissue processing takes about one month; more than 12 samples extend the schedule proportionally.

服務定位:本室提供電子顯微與分子層級影像服務,並結合技術支援與教育訓練,協助細胞結構、材料微觀及生物醫學研究。
05 申請資格與預約流程 / Application & Reservation文件下載、預約、收據、首次諮詢與處理時程
至臨床醫學研究部網站下載文件

下載電子顯微鏡委託申請表、委託注意事項及研究繳費單。Download the application form, service guidelines, and research payment form from the Department of Medical Research website.

填妥文件並預約

將申請表與繳費單送至超微細構造研究室並預約。Submit the forms to the Ultrastructural Research Laboratory and schedule service.

攜帶繳費收據

於預約時間攜帶繳費單據,經管理者檢視後進行實驗。Bring the payment receipt to the scheduled session for staff verification.

首次使用先行諮詢

首次使用或委託檢體製備者,須先與負責人溝通。First-time users or sample-preparation clients must consult staff in advance.

預留處理時間

完整組織處理約一個月;超過 12 件時完成時間依比例延長。Allow about one month for full tissue processing; more than 12 samples extend the timeline.

繳費與退款:費用繳納後無法退費,請先確認時程並避免遲到;院內外計畫轉帳之收款代號為 1171。Fees are non-refundable. Confirm the schedule and avoid delays. The collection code for project transfer is 1171.
06 操作規範與注意事項 / Operation Rules繳費、轉帳、收據、首次諮詢、處理時程與退款
自行繳費地點

醫研部開單後,至啟川大樓 6 樓出納組繳費。After the payment form is issued, pay at the Cashier Office on the 6th floor of Chi-Chuan Building.

研究計畫轉帳

院內外計畫由財務室轉帳,收款代號 1171。Project transfers are processed by the Finance Office using collection code 1171.

攜帶繳費單據

預約時須出示繳費收據,經管理者確認後方可進行。Present the payment receipt at the scheduled session for verification.

首次使用先諮詢

首次使用或送交樣品前處理者須先溝通安全與樣品需求。First-time users and sample-preparation clients must consult staff regarding safety and specimen requirements.

組織處理時程

完整流程約一個月;超過 12 件時依比例延長。Full processing takes about one month; more than 12 samples extend the schedule.

收費後不退費

完成收費後無法退費。Fees are non-refundable after payment.

07 使用收費、地點與文件 / Fees, Location & DocumentsTEM 與前處理收費、超微細構造研究室及相關表單
使用者類別/服務User Category / Service收費標準
院內使用者 Internal Users TEM 自行 NT$ 1,500/小時;委託 NT$ 2,400/小時
組織處理委託 NT$ 3,600/小時;超薄切片 NT$ 2,100/塊;離子覆膜自行 NT$ 420/次
院外使用者 External Users TEM 自行 NT$ 2,500/小時;委託 NT$ 4,000/小時
組織處理委託 NT$ 6,000/小時;超薄切片 NT$ 3,500/塊;離子覆膜自行 NT$ 700/次
育成中心進駐廠商 Incubation Center Tenant 原始資料未提供收費
儀器放置地點

醫學研究大樓 2 樓
超微細構造研究室

Location

Ultrastructural Research Laboratory
2nd Floor, Medical Research Building

Go to top